Telegram to MT5 copier
Copy Telegram signals to MetaTrader 5
TradeMirrorly reads the Telegram channels you choose and places each signal on your MT5 account, with your own lot size, SL and TP rules. The app installs its EA into MetaTrader 5 for you and opens MetaTrader with it.
- Start on a demo account
- Any MT4/MT5 broker
- Windows and macOS
Setup
How to copy Telegram signals to MetaTrader 5
The guided setup takes you through it one task at a time: connect Telegram and MetaTrader, make your first cockpit, test it, then check a new signal on a demo account.
Before you start
- Install TradeMirrorly and MetaTrader 5 on the same computer. Keep both running while you copy; a Windows VPS is another option.
- Have a broker demo account ready, and log MetaTrader 5 in to it. The app learns the account number from the EA, so there's nothing to type.
- Join the Telegram channel, group, topic or bot you want to copy with your own Telegram account.
- Short on time? Finish later goes to the dashboard, and the setup resumes where you left it. Settings › Run the guided setup starts it again.
- 1
Activate TradeMirrorly
Start a monthly or yearly plan with the 3-day free trial. Download the app from your account portal and paste your license key. Your key is in your email and on your account's Dashboard. The guided setup starts: nine steps in three parts.
- 2
Connect Telegram
Open Telegram on your phone and scan the QR code shown in TradeMirrorly. Your Telegram session stays on your computer.
- 3
Connect {platform}
In the Broker step the app finds MetaTrader 5 on your computer, installs the EA and opens MetaTrader 5 with it on a chart. When the EA reports your demo account, click Use this account. There's no account number to type.
- 4
Make your first cockpit
A cockpit is a source, its rules and the account it copies into. Pick a channel you already belong to, set its basic rules (size, SL and TP; your broker's names for common symbols are one click each), then click Copy into this account.
- 5
Test it
The Test step reads a sample signal at your broker's own price. It can also place a real limit order far from the price and remove it again (a live account is asked first), or wait for the next real message.
- 6
Check a new signal on History
When a new signal arrives, click its row on History for its own page. Compare the symbol, side, size, SL and TP with the positions in MetaTrader 5. If it did not open, read what happened before changing any settings.
The EA
The app installs the EA for you
The app installs the EA for you and opens MetaTrader with it. One click, no files to copy.
- The MetaTrader page lists every MetaTrader 4 and 5 on your computer
- Install puts the TradeMirrorly EA into the one you pick
- Open with TradeMirrorly starts MetaTrader 5 with the EA on a chart and automated trading on
- After an update the app tells you to restart MetaTrader so it loads the new EA


History
See what happened to every signal
History lists every signal and what the EA did with it: opened, managed, blocked or not opened, and why. Click a row for the signal's own page: its timeline to the minute (received, sent, read by the EA, filled at what price), its cockpit and its tickets.
- A trade that didn't open is marked NOT OPENED, with the reason in plain words and what to fix
- A desktop alert for every trade that didn't open
- Works with MetaTrader closed: it also reads your account's copy on TradeMirrorly
- Nothing hidden in MetaTrader's logs
Journal · Pro
Your trading journal, filled in for you
Every trade on your MetaTrader 5 account in one place: the ones TradeMirrorly copied, the ones you placed yourself and other EAs'. Net result, profit factor, drawdown, balance, a calendar of your days, and each symbol. It's kept in your TradeMirrorly account too, so a reinstall or another computer of yours still has it.
See the Journal
MetaTrader 5: good to know
Use a hedging account
A signal usually opens several trades, one per TP, so on MetaTrader 5 a hedging account works best.
Algo Trading, switched on
Open with TradeMirrorly starts MT5 with the EA on a chart and Algo Trading on. If you attach it yourself, allow Algo Trading.
One chart handles everything
The EA on one chart copies every symbol and every channel of that account.
What it does with every signal
- Reads BUY/SELL, entry, SL and every TP, with no setup
- Manages the trade from replies: close, close half, breakeven, move SL or TP
- Sizes each trade in lots, money or a % of your balance
- Splits the size over the TPs, evenly or your own way
- 64 trade settings per channel: breakeven, smart profit lock, trailing stop, daily loss limit and more
- Tells you why a trade didn't open, and what to fix
The message
XAUUSD SHORT @ 2350 STOP LOSS 2360 TAKE PROFIT 1: 2340 TAKE PROFIT 2: 2330
What TradeMirrorly reads
- Side
- SELL
- Symbol
- XAUUSD
- Entry
- 2350
- Stop loss
- 2360
- TP1
- 2340
- TP2
- 2330
Trade on TradeLocker or Match-Trader too? Same app, same settings.TradeLocker copierMatch-Trader copier
Troubleshooting
Telegram signal not copying? Start here
Open the signal's own page on History first. Fix the reported cause and check a new signal on your demo account.
EA not running or automated trading off
Check that the app and the correct MetaTrader terminal are open on the same computer. Use Open with TradeMirrorly. If attaching the EA manually, refresh Navigator and attach it to one chart; allow live trading on MT4 or Algo Trading on MT5.
The broker has no symbol called GOLD
The EA tries an instrument's other names by itself, so GOLD trades as XAUUSD with no mapping. If History still says your broker has no such symbol, open Configure → Trading → Symbols for the channel and apply the suggested name. Suggestions are not applied until you choose them.
Guide to broker symbol namesA signal was skipped as too old
New signals more than 2 minutes late are skipped. Check your connection and wait for a fresh signal on the demo account. An old message is not a reliable installation test.
Paused, outside hours or blocked by news
Check the reason against your saved trading hours, pause state (copying, the source's switch on Channels, or the equity protector) and news filter. These controls can deliberately prevent a new trade; a skipped signal does not necessarily mean the connection failed.
Several take profits do not open as separate positions
On MT5, check whether your broker account uses hedging. A hedging account works best for separate trades per TP. Review your saved TP split settings too.
Closed MT4 trades are missing
In MT4, right-click Account History and choose All History. The EA can only report the history the terminal makes available.
Does it work with my MT5 broker?
Yes, with any broker that offers MetaTrader 5, demo or live. If your broker names symbols differently (GOLD or XAUUSD, a .raw suffix), the app suggests the right names.
Do I need to copy EA files into MetaTrader?
No. The app lists every MetaTrader on your computer, installs the EA into the one you pick with one click, and opens MetaTrader with the EA on a chart and automated trading on. After an update, the app tells you to restart MetaTrader so it loads the new EA.
What if a signal isn't copied?
History says why, in plain words, and what to fix: an unknown symbol, market closed, outside your trading hours, too old, paused, blocked by the news filter. You also get a desktop alert. Click any signal for its own page, with its timeline and the price it filled at.
Can it stop copying when my account loses too much?
Yes. Each channel can have its own daily loss limit, and the equity protector (My brokers › Protector, on every plan) sets a daily loss limit, a daily profit target and a max drawdown for the whole account. On MetaTrader 5 it runs inside the EA every 2 seconds while MetaTrader runs.
Can I copy to TradeLocker or Match-Trader too?
Yes. Sign in to your TradeLocker or Match-Trader account inside TradeMirrorly and the app trades it itself, with the same settings as MetaTrader. No EA, and no MetaTrader needed for those accounts.
Which Telegram channels can I copy?
Channels, groups, forum topics and bots you're a member of. You sign in with your own Telegram account by scanning a QR code; the channel admin can't tell you're copying.
Do I need to keep my computer on?
Yes. TradeMirrorly and MetaTrader 5 run on the same computer, which can be a Windows VPS if you want copying to run around the clock.
Can I try it first?
Yes. Monthly and yearly plans start with a 3-day free trial, and you can copy into a demo account.
More guides
- Telegram to MT4Copy signals to MetaTrader 4
- Telegram to TradeLockerSame app, no EA needed
- Telegram to Match-TraderSame app, no EA needed
- TradingView alertsCopy alerts by webhook (Pro)
- Symbol namesGOLD, XAUUSD, NAS100, US30 and more
- Signal languages11 languages, read with no setup
- Free trading calculatorsLot size, pip value, margin and risk:reward
- Compare copiersTradeMirrorly vs other signal copiers
- Why TradeMirrorlyWhat it does, and what it never does
Symbol names
- XAUUSD (Gold)GOLD, XAU, GOLDUSD
- XAGUSD (Silver)SILVER, XAG, SILVERUSD
- XPTUSD (Platinum)PLATINUM, XPT
- US30 (Dow Jones)DJ30, DJI30, DOW
- NAS100 (Nasdaq 100)USTEC, US100, NDX100
- SPX500 (S&P 500)US500, SP500, SPX
- GER40 (DAX)DE40, GER30, DE30
- UK100 (FTSE 100)FTSE100, FTSE, UKX
- JPN225 (Nikkei 225)JP225, NI225, NIKKEI
- AUS200 (ASX 200)ASX200, AU200, AUSTRALIA200
- EU50 (Euro Stoxx 50)STOXX50, EUSTX50, ESTX50
- FRA40 (CAC 40)CAC40, FR40, FRANCE40
- USOIL (WTI crude oil)XTIUSD, WTI, OIL
- UKOIL (Brent crude oil)XBRUSD, BRENT, BRN
- BTCUSD (Bitcoin)BTC, BITCOIN, BTCUSDT
- ETHUSD (Ethereum)ETH, ETHEREUM, ETHUSDT
Let every signal size itself.
Start the 3-day free trial, set your risk once, and let the guided setup make your first cockpit.
